I am trying to install xandros (the free edition) onto a Pc that I have previously installed Suse 9.3 (and 9.2) sucessfully.
The CD boots fine, and gets to the point where it is "reading CD-ROM data", and it hangs.
I ran it under "custom" and the error message clearly fingers the CD-ROM reading (CMD timeout, etc), however as previous installations have worked fine, I can't see why this one should fail.
I have also tried burning another CD, and it still fails.
I have disabled ACPI in the bios, but it still didn't work.
The CD is on the slave port of the primary IDE bus, and is seen properly by the bios.
Brian j Read